Textures

ProForm® Factory Built Housing Texture Grade Ready Mix Compound

A non-aggregated, ready-to-use spray specially formulated for texturing walls and ceilings in manufactured housing facilities.

Resources

3-Part Guide Specs

Literature

Submittals

Submittal Builder

Formulated for manufactured housing facilities

A variety of textures can be achieved

  • Excellent bond.
  • Provides a light texture.
  • Allows great pattern versatility.

ProForm® Factory Built Housing Texture Grade Ready Mix Compound is a non-aggregated, ready-to-use spray specially formulated for texturing walls and ceilings in manufactured housing facilities.

Factory Built Housing Texture Grade Ready Mix Compound can be used for a variety of textures. By adjusting air pressure and/or varying application techniques, a variety of textures can be achieved.

Advantages

  • Ready to use right from the container.
  • Excellent bond.
  • Provides a light texture.
  • Allows great pattern versatility.
  • Dries white.
  • Conceals minor imperfections.

Specifications

Products that suit any project criteria

Product Details

Applications:

Texturing

Packaging:

Tote

Coverage:

13,000-41,000 sq ft

Tote Volume:

275 gal

Frequently Asked Questions

Ready to answer your product and installation questions

No material can be considered “mold-proof,” nor is it certain that any material will resist mold or mildew indefinitely. However, when used in conjunction with good design, handling, and construction practices, ProForm ready mix can provide increased mold resistance versus standard ready-mixed compounds. As with any building material, avoiding water exposure during handling, storage and installation and after installation is complete is the best way to avoid the formation of mold or mildew.

A good rule of thumb is to use nine gallons of ready mix for every 1000 sq ft of wallboard.

Ready mix pails or cartons should not be stacked more than two pallets high.

Nine months in good storage conditions. To prevent spoilage and freezing, maintain temperature at a minimum 50˚F (10˚C) and protect container from exposure to extreme heat and sunlight.

While not ideal, ProForm joint compound can go through up to 3 freeze-thaw cycles. Allow material to thaw at room temperature for at least 24 hours. When thawed, turn the container upside-down for at least 15 minutes. Turn pail right-side up, remove the lid and immediately remix with an electric drill. Ready mix should be lump-free and ready to use within 1 minute. Discard ready mix that does not remix to a lump-free consistency.

Related Resources

Product details and technical documentation

EPDs

HPDs

Product MasterSpec

4 Design center

Design & Resources

Review ProForm details and technical information in the Design & Resource Center.

Design & Resource Center
Expert Connection

Expert Connection

Contact ProForm representatives who can help troubleshoot your project challenges.

Get Started

Need Technical Information?

Call 1-800-NATIONAL®

National Gypsum Company is the exclusive service provider for products manufactured by ProForm Finishing Products, LLC.