Ready Mix

ProForm® All Purpose Texture Grade Joint Compound

Vinyl base ready mix joint compound that may be used directly from the container.

Resources

3-Part Guide Specs

Literature

SDS

Submittals

Ready to use

Formulated for texturing walls and ceilings
  • Allows great pattern versatility.
  • Applies easily and provides excellent bond.
  • Mold resistant.

ProForm® All Purpose Texture Grade Joint Compound is a vinyl base ready mix joint compound that may be used directly from the container.

Texture Grade Joint Compound is a ready to use material specially formulated for texturing walls and ceilings. It bonds well with multiple surfaces, including gypsum panels, properly prepared concrete, primed plaster, interior masonry and non-staining wood surfaces.

Advantages

  • Ready to use right from the container.
  • Excellent adhesion/bond.
  • Allows great pattern versatility.
  • Conceals minor cracks and other imperfections.
  • Mold resistant.
  • Low VOC content - less than 2 grams/liter.

Availability

  • Southwest Region - carton only

ProForm® All Purpose Texture Grade Joint Compound manufactured in Dallas has achieved UL GREENGUARD Certification.

Specifications

Products that suit any project criteria

Product Details

Applications:

Texturing

Packaging:

Carton

Coverage:

123-140 lbs/9 gal per 1,000 sq ft

Carton Volume:

50 lb

Related Resources

Product details and technical documentation

EPD

HPD

Product MasterSpec

UL GREENGUARD Certification

Frequently Asked Questions

Ready to answer your product and installation questions

What is the shelf life of ready mix?

Nine months in good storage conditions. To prevent spoilage and freezing, maintain temperature at a minimum 50˚F (10˚C) and protect container from exposure to extreme heat and sunlight.

Do you have mold resistant ready mix?

No material can be considered “mold-proof,” nor is it certain that any material will resist mold or mildew indefinitely. However, when used in conjunction with good design, handling, and construction practices, ProForm ready mix can provide increased mold resistance versus standard ready-mixed compounds. As with any building material, avoiding water exposure during handling, storage and installation and after installation is complete is the best way to avoid the formation of mold or mildew.

How much does a pail or carton of ready mix cover?

A good rule of thumb is to use nine gallons of ready mix for every 1000 sq ft of wallboard.

How should ready mix be stacked?

Ready mix pails or cartons should not be stacked more than two pallets high.

What happens if my ready mix freezes?

While not ideal, ProForm joint compound can go through up to 3 freeze-thaw cycles. Allow material to thaw at room temperature for at least 24 hours. When thawed, turn the container upside-down for at least 15 minutes. Turn pail right-side up, remove the lid and immediately remix with an electric drill. Ready mix should be lump-free and ready to use within 1 minute. Discard ready mix that does not remix to a lump-free consistency.

4 Design center

Design & Resources

Review ProForm details and technical information in the Design & Resource Center.

Design & Resource Center
Expert Connection

Expert Connection

Contact ProForm representatives who can help troubleshoot your project challenges.

Get Started

Need Technical Information?

Call 1-800-NATIONAL®

National Gypsum Company is the exclusive service provider for products manufactured by ProForm Finishing Products, LLC.