Formulated for professional drywall contractors and finishers
Spreads easier for quicker application
- Ideal for all phases of finishing.
- Spreads easier for quick application.
- Mold resistant.
ProForm® Multi-Use Joint Compound is a vinyl base ready mix joint compound formulated especially for professional drywall contractors and finishers. It may be used directly from the container.
ProForm Multi-Use Joint Compound is designed for tape application, fastener spotting, texturing and complete joint finishing of gypsum board. It can also be used to repair cracks in plastered walls.
- Ready to use right from the container.
- Excellent adhesion/bond.
- Easier pull.
- Spreads easier for quicker application.
- All finishing can be done with one compound.
- Excellent sanding characteristics.
- Mold resistant.
- Low VOC content - less than 2 grams/liter.
ProForm® Multi-Use Joint Compound manufactured in Atlanta, Belcamp, Jasper and Orlando has achieved UL GREENGUARD Gold Certification.
ProForm® Multi-Use Joint Compound manufactured in Dallas has achieved UL GREENGUARD Certification.
Products that suit any project criteria
123-140 lbs/9 gal per 1,000 sq ft
3.5 gal, 4.5 gal
Product details and technical documentation
Frequently Asked Questions
Ready to answer your product and installation questions
Do you have mold resistant ready mix?
No material can be considered “mold-proof,” nor is it certain that any material will resist mold or mildew indefinitely. However, when used in conjunction with good design, handling, and construction practices, ProForm ready mix can provide increased mold resistance versus standard ready-mixed compounds. As with any building material, avoiding water exposure during handling, storage and installation and after installation is complete is the best way to avoid the formation of mold or mildew.
How much does a pail or carton of ready mix cover?
A good rule of thumb is to use nine gallons of ready mix for every 1000 sq ft of wallboard.
How should ready mix be stacked?
Ready mix pails or cartons should not be stacked more than two pallets high.
What is the shelf life of ready mix?
Nine months in good storage conditions. To prevent spoilage and freezing, maintain temperature at a minimum 50˚F (10˚C) and protect container from exposure to extreme heat and sunlight.
What happens if my ready mix freezes?
While not ideal, ProForm joint compound can go through up to 3 freeze-thaw cycles. Allow material to thaw at room temperature for at least 24 hours. When thawed, turn the container upside-down for at least 15 minutes. Turn pail right-side up, remove the lid and immediately remix with an electric drill. Ready mix should be lump-free and ready to use within 1 minute. Discard ready mix that does not remix to a lump-free consistency.
Detailed information to support your next project
Design & Resources
Review ProForm details and technical information in the Design & Resource Center.Design & Resource Center
Contact ProForm representatives who can help troubleshoot your project challenges.Get Started
Need Technical Information?
National Gypsum Company is the exclusive service provider for products manufactured by ProForm Finishing Products, LLC.