

Easy Finish® Joint Compound
Vinyl base ready mix joint compound that may be used directly from the container.
Vinyl base ready mix joint compound
Use for tape application, fastener spotting and complete joint finishing of gypsum board
Easy Finish® Joint Compound is a vinyl base ready mix joint compound that may be used directly from the container. Use for tape application, fastener spotting and complete joint finishing of gypsum board. Can also be used to repair cracks in plastered walls, to texture surfaces and to laminate gypsum board to other surfaces such as masonry or other drywall. Contains sufficient binder to secure the reinforcing tape and develops its strength and hardness by drying.
- Excellent adhesion/bond.
- Ideal for use in all aspects of wallboard finishing.
- Excellent sanding characteristics.
- Premixed compound is ready to use directly from the container.
- Applies easily.
- Provides a highly durable surface.
- GREENGUARD® Certified for indoor air quality.
- Low volatile organic compounds (VOC) content - less than two grams/liter.
Easy Finish® Joint Compound has achieved GREENGUARD Certification.
Specifications
Products that suit any project criteria
Product Details
Applications:
Finishing
Packaging:
Pail
Coverage:
123-140 lbs/9 gal per 1,000 sq ft
Pail Volume:
58 lb
Frequently Asked Questions
All the information you need for quick and easy installation
No material can be considered “mold-proof,” nor is it certain that any material will resist mold or mildew indefinitely. However, when used in conjunction with good design, handling, and construction practices, ProForm ready mix can provide increased mold resistance versus standard ready-mixed compounds. As with any building material, avoiding water exposure during handling, storage and installation and after installation is complete is the best way to avoid the formation of mold or mildew.
Ready mix pails or cartons should not be stacked more than two pallets high.
A good rule of thumb is to use nine gallons of ready mix for every 1000 sq ft of wallboard.
While not ideal, ProForm joint compound can go through up to 3 freeze-thaw cycles. Allow material to thaw at room temperature for at least 24 hours. When thawed, turn the container upside-down for at least 15 minutes. Turn pail right-side up, remove the lid and immediately remix with an electric drill. Ready mix should be lump-free and ready to use within 1 minute. Discard ready mix that does not remix to a lump-free consistency.
Nine months in good storage conditions. To prevent spoilage and freezing, maintain temperature at a minimum 50˚F (10˚C) and protect container from exposure to extreme heat and sunlight.
Related Resources
Product details and technical documentation

Design & Resources
Review ProForm details and technical information in the Design & Resource Center.
Design & Resource Center
Expert Connection
Contact ProForm representatives who can help troubleshoot your project challenges.
Get StartedNeed Technical Information?
Call 1-800-NATIONAL®
National Gypsum Company is the exclusive service provider for products manufactured by ProForm Finishing Products, LLC.